Do you know how to maintain the machining center

CNC machine tools are expensive, require high precision, and require daily maintenance.Here are some suggestions for daily maintenance given by jiahangaero.

• 1. Clean the dust and iron filings of the machine tool every day: including machine tool control panel, spindle taper hole, tool cart, tool head and taper handle, tool magazine arm and tool warehouse, turret; XY axis sheet metal shield, machine tool Inner flexible hose, tank chain device, chip flute, etc.;

• 2. Check the level of lubricating oil to ensure the lubrication of the machine tool;

• 3. Check whether the coolant in the coolant tank is sufficient, and if it is not enough, add it in time;

• 4. Check whether the air pressure is normal;

• 5. Check whether the air blowing in the cone hole of the spindle is normal, wipe the cone hole in the spindle with a clean cotton cloth, and spray light oil;

• 6. Clean the tool magazine arm and tool, especially the claw;

• 7. Check whether all the signal lights and abnormal warning lights are normal;

• 8. Check whether there is any leakage in the oil pressure unit pipe;

• 9. After the daily work of the machine tool is completed, carry out cleaning and cleaning work;

• 10. Keep the environment around the machine clean.